Hinge-it Handy Hook

How to Install a Sink Here are basic instructions on how to install a sink – a do-it-yourself project you can master! DIY kitchen sink installation is best done with a top-mount style sink. Though under-mount sinks have become supremely popular, the top-mount is less expensive and much easier to install yourself. Top mounts come in more styles and colors and, unlike under mounts, can be easily replaced by a homeowner. The following top-mount techniques to install a kitchen sink include: Cutting the hole in the countertop Mounting the sink Removing the old sink How to Install a Sink – Cutting the Countertop Most new sinks come with a template, but if yours doesn’t, here’s the best way to cut the countertop hole for your sink.

How to Install a Garbage Disposal in a Single Sink

Assuming the drainage lines were piped properly, tubs and showers usually have hair as the main cause of their stoppages. Physical removal of hair is best. The regular use of a product such as Roebic K can help prevent slow drains and stoppages. The most often clogged drain is the kitchen sink. Kitchen sink stoppages are usually caused by liquid fats, emulsified by warm soapy dishwater and then carried through the drainpipes.

As the water cools it proceeds down the drain and leaves the fatty deposits along the piping.

Water Supply System. Our Meteorite came with a portable 5 gallon water tank, a single sink, and a hand pump. Installing drain for the double sink. Above: Top of sink folds over for transport. Sink is residential height when set up. Lower door is for storage and access to water pump, water heater, and plumbing should maintenance be.

I have a three-tiered closet. No problem reaching the top level once you get the hang of it. It is long enough to reach the highest rung in our closet. Shipping was fast and it was easy to assemble. It seems like you may have to keep tightening it up where the pieces screw together. I will be buying one for my daughters as well as my sister. There are no telescoping parts or other weak joints.

I like that there is a choice of 2 lengths. Helpful in the garage too. It feels solid and I suspect it will last years. I would recommend this product to family or friends. It is exactly what I needed. Good quality and plenty long enough. The price was certainly cheap enough but the shipping was almost the same cost of the item so I went ahead and got two – one for my wifes closet and one for mine and glad I did.


Plunger 1 Keep the toilet from overflowing. If your toilet doesn’t flush properly after one flush, don’t flush again. This will cause more water to be pumped into the toilet bowl. Instead, take the lid off of the toilet tank and close the toilet flapper.

Use these simple steps to unclog your kitchen sink drain before calling a plumber. A clogged disposal can stop up the drain, so run the disposal to see if that clears the clog. If you have a double sink, first seal off the second side with a wet cloth or a stopper. You’ll need to create a tight seal around the plunger, so fill the.

Monday, November 12th, , Created: Thursday, January 31st, How do you put the vent pipe in an island sink? Tom from Toronto, Ontario wants to know how to go about putting a vent pipe into the drain of a kitchen island sink. Good question Tom, because you don’t have a wall which will simply allow you to go from the drain pipe uphill to the vent stack as we usually do.

The first drawing shows a simple method, but one that is not accepted by all municipalities or plumbing inspectors. You simply have a long vertical run for the drain and put the trap in the floor below. That permits having the vent pipe come off the top of the horizontal run and go up as it should do. Two problems with this:

How to Install a Garbage Disposal in a Single Sink

How to Replace Kitchen Sink Pipes With a Garbage Disposal A garbage disposal can be installed in either a single kitchen sink or on one half of a double sink with a strainer basket in the drain of the second half of the sink. Installing a disposal on a single sink is a much simpler task, as you won’t have to contend with the tie-in for the second sink.

You can install a garbage disposal in a single sink in a couple of hours with some basic hand tools. Then hold a noncontact electrical tester against the wires for the garbage disposal beneath the sink.

how to hook up a bathroom sink drain home guides “how to hook up a bathroom sink drain” accessed september 05 plumb a bathroom vanity sink drain what is the mon waterline size under a sink install a vanity sink give your bathroom a dramatic makeover in one long weekend by replacing the vanity cabinet sink and faucets we ll show you how to remove the old cabine plumbing can i hook up a double.

Having two sinks can give you space and save you time in the morning. What a show it would be if my wife and I were to try using one bathroom to get ready for our day at the same time. Preparations A project like this takes some serious planning. Remember, for this to look right you need to have identical sinks and identical faucets. If you try to get away with using your old sink and faucet, and then just installing something new next to it, the home-fashion police will throw you in jail for a long time.

Your bathroom sink drain is vented someplace. It may tie into a single vent stack along with the other bathroom fixtures, going through the roof or having what is sometimes called an auto vent. Make sure you have the right auto-vent. Although you could have a clog downstream of both traps, the chances of having one sink operable when one is clogged will be far greater than if you only had one trap for both sinks. After the two drains join together, you can then use a common vent. If your pipes are not labeled, now would be a good time to start labeling them when you find them.

In such a case, now would also be a good time to install shut-off valves to that area.

Kitchen sink faucet lost its water pressure

Old furniture you have on hand, such as a dresser or desk, might offer a unique and affordable alternative. While not an easy DIY project, perhaps you can tackle the furniture retro-fitting and call in the Sacramento plumbing experts to put it all together. Steps for Creating the Vanity The project will require a vanity, sink, faucets and a variety of power tools that include a jig saw, a nail gun, a power drill, a tape measure, and hinges.

Additional plumbing parts may also need to be purchased.

The pop-up stopper fits into a drain body that is connected just like a kitchen sink’s strainer body, as shown at right. (For more information, see Bathroom Sink Plumbing. Underneath the sink, a rubber gasket, metal washer, and large locknut or retainer tightens the body to the sink.

Comments 72 Typical costs: The traditional dig-up-and-replace method requires excavating a long, deep trench or trenches to remove the old pipes and install new ones. Trenchless sewer replacement uses minimal digging with one of several methods — pipe-bursting, in which a machine breaks and pushes out the old pipe while pulling through and installing a new pipe in its place. Smaller projects generally cost more per foot. Traditional dig-and-replace sewer work can require a lot of invasive excavation and result in a patched-up yard, but can be a relatively simple project; an excavator digs up the old pipes, new ones are installed and the trench is refilled.

A California plumber provides a video of replacing old clay piping using traditional methods[ 1 ]. Trenchless methods are usually faster than the traditional approach, but require at least some digging, usually at each end of the existing pipe and anywhere in-between where it bends or turns. A video by the manufacturer US Trenchless illustrates the pipe-bursting process[ 2 ] while one by a New Hampshire plumbing company explains sewer pipe relining[ 3 ].

Sewer pipe installation or replacement generally requires a permit; check with the local building department or make sure the contractor is handling all needed government approvals and paperwork. Ask detailed questions about what condition the yard will be in when the project is completed. Shopping for sewer line replacement: Replacing a private sewer line can be done by a plumber, sewer contractor or general contractor; get a variety of quotes because they may differ in both price and available equipment.

Dishwasher Drain And Water Supply Installation

I want to install a 24″ vanity in my br – a model with drawers on the right side. The vanity is supposed to fit in the left corner of the bathroom, with the toilet to the right. However, the vanity fits against the back wall right where the vertical member holding the drawer slides will obstruct the drain coming out of the wall. Are there any plumbing tricks in order to be able to hook a unit up?

I could move it a few inches to the right, but then I’d have a gap between the vanity and the wall, which would not look very nice. Or would a plumber have to re-position the drain, which is not something I want to get into.

Utility Sink Hook-Up Options The great thing about this project is that you can tailor it to fit your needs, with as much (or as little) plumbing work as you want. The sink in the photo uses cold water from the hose, with the waste routed into the drain for the outdoor shower behind it.

Bathrooms Plumbing an entire bathroom may seem like a big project and in some cases it is. Running all the waste and water lines through floor joists and walls can take some planning and trial and error. That’s the hard part of plumbing a bathroom and it’s different for each project. Take some extra time to draw out your plans to make sure you’ll be running lines the best way possible.

Once you’ve run the waste and water lines, the rest of the job involves getting all the fixtures in place and hooking them up. Setting Toilets Most toilets are assembled in two pieces:

double vanity sink hookup on bathroom remodel job